Tip:
Highlight text to annotate it
X
Let’s face it getting down on the floor to paint baseboards and moldings doesn’t
sound like much fun, does it? But there are some steps that you can take that’ll make
this job easier. Wipe the baseboard with a damp cloth to remove dust and dirt. Now if
you have a good, steady hand you may choose to cut in the baseboard and trim. If you are
not experienced, then put painter’s tape on the wall just above the baseboard to help
avoid getting paint on the wall.
Now painter’s tape comes in a variety of sizes, and you may wanna use a wider tape
if you are concerned about paint on the wall. Also place painter’s tape around the doorway
and top edge of the door. Now if you’ve already prepared the floor for painting with
a drop cloth and tape, then both your wall and floor should be protected while you paint
the baseboards. The size of the brush needed will be determined by the size and type of
trim. Usually a 2 or 2 ½ angle-sash brush will do a great job.
If choosing a latex paint, select a good quality nylon or polynylon brush. If you’re using
angle paint use a natural bristle brush like this one. The best place to start painting
is in the corner, and then work your way around the room. Carefully paint in a nice straight
line; make sure your paint strokes follow the length of the baseboard rather than going
up and down. Now once you’ve completed the painting and the paint is set to touch, you
should remove the painter’s tape.
We recommend using a sheen that is higher in gloss than what’s on the walls, as this
will showcase your molding, separating your walls from the trim. However, this is a personal
choice.