Tip:
Highlight text to annotate it
X
Alright, so we just basically gone over our safety check and what I'm going to do now
is I'm actually going to start the disassembly process and what we have to do to start with
this process is right up here at the front of the forearm and I'm going to stand this
up. We're going to do this and we're going to unscrew our fore end cap and it's going
to be a little bit of tension and your going to feel and hear some clicking as your doing
this, but that's okay. What that is, is it's just a loaded ball bearing that helps you
gauge the tension and what we're going to do is we're just going to unscrew this and
it's on there pretty good and you want it to be on there pretty good because this is
what keeps your barrel inside your action and your fore grip attached to your barrel
and pushed in to the action. So what I'm going to do now that I have that undone is I'm just
going to look up here and I'm going to make sure that I don't have anything in my threads
and this is just a habit for myself. I'm going to look and I don't see anything inside these
threads. So what we're going to do next is we're actually physically take apart and take
this barrel and our fore grip off the shotgun.