Tip:
Highlight text to annotate it
X
You can easily craft a unicorn horn for a costume, party decoration, or just for fun!
This easy craft is fun to make and a great activity to do with a child. Whether you want
to make a paper horn, a party hat horn, or a foam horn headband, you will be able to
easily create a fabulous unicorn horn. Method 1
Crafting a Horn From Paper Get heavy weight paper..
To make a unicorn horn, you will need piece of thick, heavy weight paper. Cardstock or
a thick scrapbooking paper would be best.
You can use decorative paper to make your horn unique.
Cut a cone shape out of the paper.. Draw a large triangle with a rounded bottom
on the paper. Cut along the outline of the triangle. Then, cut the tip off of the top
of the triangle so it has a flat top. Roll the paper into a cone..
Start on one side of the triangle and roll it towards the other side, making the triangle
form a cone. Tape the outer edge of the cone to secure it. Then, put a piece of tape on
the edge of the paper in the inside of the cone to give it extra stability.
Try to keep the base of the cone about the size of a milk jug's top to make it look like
a horn. Attach a ribbon or elastic..
Use a hot glue gun to glue a ribbon or piece of elastic to the base of the horn. Glue one
side of the ribbon to the inside of one side of the horn, then repeat with the other side.
Decorate your unicorn horn.. You can decorate your unicorn horn to add
finishing touches and make it unique. Be creative and express yourself! There are many different
things you can use to decorate your horn.
Paint Ribbons
Glitter Stickers
Markers or crayons Method 2
Turning a Party Hat into a Horn Get a party hat..
You need a party hat that is made from lightweight cardboard to make a unicorn horn. You can
find them at your local party store and some grocery stores.
Undo the party hat.. Find out where the hat is connected, and undo
it so you can roll it out flat. If the party hat is taped, remove the tape or gently cut
the tape to undo it. If the hat is glued together, carefully use scissors to separate it. Then,
unroll the party hat out flat.
Keep the elastic attached to the hat Roll the hat tighter..
To make the horn, you need to roll the hat up again, but roll it tighter than it was
before. Start with one side of the party hat, and roll it towards the other side creating
a tighter roll. Keep rolling until you have a nice tight cone shape.
Tape the hat together.. Use tape to secure the hat into the horn shape.
Use a hot glue gun, or put several pieces of tape on the outer edge of the party hat
to secure it to the hat. Wear your new unicorn horn..
Put the base of the horn on top of your forehead and pull the elastic over the back of your
head to wear your new unicorn horn. Method 3
Making a Foam Horn Headband Get a piece of 9"x12" foam sheet..
You need large foam sheets to make a foam unicorn headband. You can get them from your
local craft store or buy them online.
Self-adhesive foam sheets work well for this project.
Draw a diagonal line on the foam.. On the back side of the foam sheet, use a
ruler to draw a diagonal line from the bottom left corner up to one inch inside the top
right corner. Cut along the line..
Use scissors to cut along the line you've just drawn. You will end up with a shape that
looks like a triangle with one corner that's flat.
Roll the foam into a cone.. Start with the bottom left corner of the foam
and roll it towards the bottom right corner to form the cone. Continue rolling until the
top corner is completely rolled around the cone.
Glue the foam.. Use hot glue to glue the top corner down onto
the cone to secure the cone in place. You can also put some glue on the inside to hold
the bottom of the cone in place. Trim the bottom of the cone..
Use scissors to trim the bottom of the cone so that it is even and can stand up flat on
a table. Cut fringe into the bottom of the cone..
Use scissors to make snips up ¼ inch from the bottom of the cone. Snip every ½ inch
around the bottom of the cone to create fringe. Cut a circle from the leftover foam..
Use the leftover foam you have to cut a circle that is ½ inch larger in diameter than the
bottom of the cone. Glue the foam to the headband..
Get a plastic headband to glue your horn to. Use a hot glue gun to glue the foam circle
to the bottom of the center of the headband. Then, put the cone on the top of the headband
directly above the foam circle. Glue the cone onto the circle by gluing each piece of fringe
onto the foam circle. Add embellishments..
Make your unicorn horn headband unique by adding embellishments onto the horn. Use your
imagination and make it yours.
Add jewels to the horn and headband. Glue ribbons to flow down from the top of
the horn. Use glitter glue to add designs to the horn.
Thank you for watching!