Tip:
Highlight text to annotate it
X
Step 1: Mount the air filter. Loosen or remove the top screw.
Place the screw through the top hole on the air filter bracket.
Tighten the screw.
Step 2: Connect the air filter hose. Connect the supplied short, black hose to the straight
fitting on the filter. Connect the other end to the air input fitting
on the back of the engraving system.
Step 3: Connect the foot throttle. Please note: the foot throttle hose should not be
pinched or kinked. Insert the hose into the fitting marked "throttle connection".
Step 4: Connect a GRS handpiece. Use only a GRS Standard Handpiece or a GRS Airtact
Handpiece with a standalone Airtact control system. Connect the Standard Handpiece hose
to the handpiece push-to-connect fitting.
Step 5: Connect the electrical power. Please note: use only the supplied 24-volt power
converter. Insert the converter cord into the receptacle on the engraving system. Connect
the electrical power cord into the 24-volt converter box. Use the supplied 2-prong power
adapter as needed in Europe.
Step 6: Connect an oil-free air supply. Do not operate without
an oil-free compressed air supply connected and powered on.