Tip:
Highlight text to annotate it
X
Hi, I'm Jason with Red Rum Studios. We're making a patch for our DIY pants. We've put...we've
stretched it out so that the fabric doesn't go back to where the creases where when it's
re-washed. We've broke those fibers up. We've stretched the four corners of it so far, and
we've got to do the fourth one. Now, the fourth one, sometimes is a little bit tricky, sometimes
it's not. When you pull on the fourth one, it's really hard to pull, and it starts making,
like you can see this one right here, it starts making some of the other ones not so tight.
So, where we only used to have a half an inch right there, as soon as we pulled this, now
we've got more like an inch. So, it's a little bit of a give and take right here. You pull
this one really, really tight. And it's starting to pull that one, too. So you pull it tight.
Put it in, and then keep pulling...keep the tension on this one before you pull the pin
out. Don't pull the pin out first. And then re-tack it where it's tight. You're going
to need to do that on all four corners. So go ahead and do that on all four corners,
and we'll go from there.