Tip:
Highlight text to annotate it
X
The workshop after a hot cup of joe in the morning.
Nothing better except maybe good storage.
No, I take that back.
This workstation is getting four drawers to take the place of the cabinet space.
Now building multiple drawers means lots of parts.
Things can get out of hand fast.
So I like to label everything and focus.
Rabbets for the drawer sides make them easy to assemble.
Then daddos for the drawer bottoms.
Lets rip some quarter inch ply.
Then cut to width and check that first cut.
Nothing worse than a bunch of drawer bottoms that don't fit.
Alright we are getting their.
Time for assembly.
To start I like to lay out my sides.
Some glue.
Check for square.
Lets make some drawer fronts.
Cut to length.
Rip to width.
Chamfer the edges for a little style. If you're into that.
The other side of the cabinet, too thin, too deep.
But, not if I switch the front to the side.
These plastic shelf pins will work.
Lets brace this table top.