Tip:
Highlight text to annotate it
X
Hi my dear friends!
A lot of my subscribers often asked me to show how to make an action camera
from a simple mobile phone at home
To be more accurate, how to make a head binding for a mobile phone that is the same as the GoPro binding
To be honest, such video should have been shot a long time ago if I had a budget phone with a good camera
Such a phone that you won't regret for it's falling or breaking or losing
Unfortunately, I did not have such a phone then
That's why I was always trying to postpone this video
However luckily I have been gifted a cool phone recently
It's named Wileyfox and it's very powerful to my surprise and moreover it's a budget one
I would even say that it's very budget
As this phone has 2 GB RAM, it also has a 5-inch HD display and the main thing we needed is a good camera
This phone has 13 MP camera. And this phone costs, you won't believe it, just $89
Well, guys, in order to make a head binding for the mobile phone we need a bolt with two 5 mm screws
Needles and a thread, wide textile rubber
A shorter piece has 35 cm, a longer one has 60 cm
Of course, we also need a stencil
You will be able to download the stencil following the link in the description under the video
Then, this is a piece of plastic, I have cut it out of 10 liter bottle. In order to cut out the plastic easier
we need a borer, scissors and a knife
First of all we should transfer the stencil to the plastic and then cut out two buckles
with two grooves and two buckles with three grooves
Well, in the conclusion, there is a binding for the mobile phone
We have to get such semi-products
Then we should heat properly these three legs with the help of an hot-air gun
or a lighter and wrap it around a bolt
This will enable you to control the phone up or down
Then we heat these six legs and bend them on order to fix the phone
Well, friends, in the conclusion we just have to pass rubbers through the buckles and of course stitch them
Well, friends, head binding for a phone is ready
As you may see, you may adjust the binding to almost any size of a head with the help of the buckles
There is also a controlling of the phone position downwards and upwards
Start video, insert the phone, and put onto the head
So guys, today's issue has come to an end
Thank you very much for your attention and watching this video
I hope that you enjoyed it
By the way, if you are interested in the phone and want to read characteristics
or buy it, there will be a link in the description under the video with a little discount for you
Have a nice day. Bye-bye!
Do you know?
The first smart phone appeared on sale in 1994
It had a monochrome display with screen resolution of 160x293 pixels and 1MB RAM
It's hard to believe that that technological wonder cost had been $899