Tip:
Highlight text to annotate it
X
Today on our 2013 Ford F350, we'll be installing the Bargman Fifth Wheel Gooseneck
90 degree Wiring Harness with 7 pull plug, part number 54701-003. To begin our install,
we'll first locate a suitable mounting point.Then we'll go ahead and make a pilot
hole. The pilot hole is for our larger hole saw bit, which we'll then go ahead and
cut out, so that we can feed our wires down and underneath the vehicle. Now with the cut
out from our hole saw made, we'll go ahead and take the key connector and feed it through
the hole in the bed, and ultimately, down and underneath the vehicle. Next we'll
take the new 7 pull plug, and secure it here to the side of the bed, using theself tapping
screws provided with our install kit.Our next step will be removing the older manufacturer's wiring from the manufacturers 7 pull plug,
mounted below the bumper at the hitch. To gain access to it, we'll first go ahead
and remove the push pin connector that secures the wiring to the top
of
the hitch.