Tip:
Highlight text to annotate it
X
Hi my name is Erin and I'm with Domyownpestcontrol.com. Today I'm going to do an overview on how to
properly use our measuring devices on our liquid concentrates. Most of our pint and
quart sized bottles in our liquid concentrate bottles come with two caps. They also come
with a special straw patented technology. This makes it easy for measuring. There's
no measuring cups or spoons necessary, everything is in one bottle for you. So what you'll do
is you'll unscrew the cap and inside you are going to remove the seal. Once you remove
the seal you're going to squeeze the bottle. Right here you'll notice there is a 1/2 ounce
mark and a 1 ounce mark. On the other side it's measured in mL. So what you're going
to do is you're going to want to squeeze this product. Depending on the insect that you're
treating you're either going to squeeze it to ½ ounce or to an ounce. And then you can
poor the liquid concentrate into your equipment diluted with water according to the product
label instructions. This is another one of our measuring devices for our liquid concentrates.
It's called the Tip 'n Poor Bottle. Okay, I'm going to show you how to measure using
our Tip 'n Poor Bottle. Some Tip 'n Poor Bottles have arrows directing you towards their measuring
reservoirs. Larger sizes do not, but you'll notice there is fluid ounces measured out
in milliliters listed on the bottles so you'll know where the measuring reservoirs are. You're
going to tip this particular one to the left following the arrow and filling it to the
line. This line is showing you that this amount of product is per gallon of water. So you
simply just tip the bottle over and it will fill it to the line for you. I hope this video
was helpful. If you need additional information please go to Domyownpestcontrol.com.