Tip:
Highlight text to annotate it
X
HERE IS WHAT YOU NEED TO CLEAN YOUR TRACKS. ........( A TILE AND GROUT BRUSH )............... ( FLAT BLADE SCREW DRIVER.)........ ( MICRO FIBRE CLOTH )
OK! First you get the brush, brushing the track lossing every thing up.
Get the vacuum cleaner and just follow it up like this.And it will take all the dirt and grit up as you go.
Now you get the flat balded screw driver and with the micro fibre cloth you run along there.
What you do is get your screw driver, then wrap your micro fibre cloth around that way it won't scratch the track
And you just go along the track with a damp or wet cloth and it will get all surface grease dust off inside of the track
Do also in the little tracks. Same thing you wrap your cloth around the screw driver. Make sure that it doesn't scratch the track on the inside.But it will clean all the other dirt / grit out.
Also near the glass here, You can wrap the micro fibre cloth the screw driver and just give it a bit of a clean like that.
You can see that the track are clean. And WELL THAT'S ABOUT IT!