Tip:
Highlight text to annotate it
X
JASON HARRIS: Hi, I'm Jason with ExpertVillage.com. And today, we're making a bracelet out wire
and coaxial cable. So far, we've cut our wire. We've cut the beads off of the coaxial cable.
We've smoothed the edge on the inside of the beads. We've cut off a little bit of excess
trim on the outside of the bead. And now, we're going to take the dremel with the sanding
bit and just go over the edge of each of the four sides really quick to smooth the outside
of the bead. So we'll do that really quick. We're just going to do the same thing as we
did last time. We're not going to try to take any away. We're just going to try to smooth
it. And we didn't cut any away. We just smoothed the edges, so that we can put the bead inside
or the inside of the bead in. We'll glue it in and paint the end also. But this kept--so
that there wasn't any excess on the outside of the bead. It keeps them nice and smooth-looking.
So we'll make the bead next. After--we'll make the bead next and then after that, we'll
paint it.