Tip:
Highlight text to annotate it
X
Today on our 2013 Ford Escape, we're going to be test fitting the Prorack 2-bike carrier
for 1-1/4" and 2" inch hitches, part number PR8062403. To begin our test fit,
we'll slide the shank of the carrier into the receiver tube of our hitch. We'll
line up the hitch pin hole and then thread in our anti-rattle bolt, tightening with a
wrench, and securing with a clip on the other side. Now we'll go over a few clearance
measurements. We have a ground clearance of about 10-1/2". The nearest point of the
carrier to the nearest point of the rear of our vehicle
is about 2".