Tip:
Highlight text to annotate it
X
Today on our 2014 Dodge Journey, we'll be test fitting the Hollywood Racks Traveler
Tow-n-Go hitch three bike rack, part number HR135. For today's test fit, we'll
be using the Hidden Hitch ball mount with super extra long shank, part number 80232.
We'll begin our test fit by sliding the shank and ball mount into the opening of the
hitch. After lining up the pin holes, we'll then go ahead and secure it with the pin and
clip, which is sold separately. Now, you'll notice with the bike rack and ball mount secured
with just a pin and clip, there is some wobble. You can reduce that by purchasing an anti
rattle device found on our website. To load up a bike, we'll remove the black pin
at the top of the mast, which is going to allow us to swing the cradle arms out. With
the cradle arms out, we can simply undo the cradle straps, place our bike into the frame
cradles, then bring the rubber straps around and secure them. With our bike all loaded
up, that will complete today's test spin of the Hollywood Racks Traveler Tow-n-Go,
part number HR135 on our 2014 Dodge Journey.