Tip:
Highlight text to annotate it
X
This is another brand new technology
that Salvagnini introduced in the market starting from this year.
This is a highly evoluted press brake that is using a mixture
of the most advanced technologies that are available on the market.
This is a press brake that bends with 135 tons and
moves up and down with a speed of 250 mm/second.
This is the fastest machine available on the market,
the second fastest is 30-40 mm/second slower.
And we limited the machine to 250 because it is limit for seal from the CE marking.
You can not go any faster.
The energy consumption compared to a traditional hydraulic press brake has been
reduced by 55-70% by increasing the speed.
We made a full range of this machine starting
from 100 tons standard tonnage up to 320 tonnage.
By using this we call it hybrid technology.
Hybrid, because we are still using a tiny little bit of oil in the machine,
but we are using the oil as a liquid belt.
We are using the oil to push the press brake downwards and to pull it upwards again.
To make you an example, this machine wiht 135 tons uses only 40 liters oil.
This is again environmental friendly.
You can easily compare how much oil is in the tank of any other machine with 135 tons.
This machine again has no tank.
This, with a positioning precision of 2 microns.
That means again low energy consumption, not only high productivity
but the highest repeatability that you can reach
on a machine with that kind of tonnage.
So really we can say, no better technology is available on the market.