Tip:
Highlight text to annotate it
X
Today on our 2008 Honda Pilot well be installing the Curt hitch, part number 13328. This is
what our hitch will look like once its installed. Next well go ahead and give you a couple measurements
to assist you with selecting accessories for your new hitch, such as a draw bar, a bike
rack or cargo carrier. From the center of the hitch pin hole to the outer most edge
of the bumper is four and a quarter inches. From the top of the receiver tube to the ground
is 16 inches. Now lets go ahead with installation. Note, weve already gone ahead and lowered
and removed the spare tire. Next well need to remove the tow hook on the drivers side.
There are a total of three fasteners that will need to be removed, as it will not be
reinstalled. Next well need to lower the exhaust. Before we lower the exhaust well put a
safety strap underneath so
that
we can lower
the exhaust safely.