Tip:
Highlight text to annotate it
X
One of the most powerful features of LayerZero Power Distribution Units is
Bluetooth connectivity, which allows users to configure PDUs at the point
of impact. With bluetooth connectivity, data center facilities are able to
wirelessly setup panels immediately after circuit breaker installation
helping to keep panel names accurate and up to date. In data centers, circuit
breakers are typically installed by facility workers, and configuration of
the PDU is completed by IT.
If the circuit breaker installation procedure involves passing information
between multiple departments, the process is prone to error.
Installing additional circuit breakers in power distribution units
involves both physically installing the circuit breakers into the panel board
and PDU configuration.
PDU configuration includes setting up panel names, configuring set points,
And setting breaker ratings. PDU configuration requires connectivity
Either wired, or wirelessly.
Connecting to PDUs with Bluetooth helps maximize safety, as the door is not
required to be open for connectivity.
PDU connectivity with bluetooth permits the use of a variety of devices
including laptops, tablets, and PDAs. Bluetooth connectivity is secure,
Reliable, and Suitable for Long-Term Installations
If a new sub-feed circuit is added to a given panel board,
The following information can be entered using a hand-held, Bluetooth-
Enabled computer over a normal web browser interface.
circuit ID
circuit parameters
number of polls, nominal amps
circuit set points, pre alarm for preliminary circuit capacity alarm
at capacity mark for final circuit capacity alarm
bluetooth connectivity helps make the process of installation additional circuit
breakers faster and more efficient
compatible with a variety of devices
bluetooth connectivity provides an effective means of wirelessly
configuring PDUs safely, securely, with higher reliability, at the point of
impact