Tip:
Highlight text to annotate it
X
Hello, this is MortaRRHunteRR, and today i will be showing you how to make a minecraft fall-damage monster trap
These are probably survivors from prior testing
Let's mess around inside it for a little while
ALRIGHT, let's start.
First, start by digging a 2 x 2 square in the floor, this is where the monsters will fall and die.
Then, build a tower that is AT LEAST 25 blocks high.
After you counted 25, repeat the 2 x 2 square at the top of the tower. You now may get rid of the tower, unless you are in survival mode.
Extend each side of the square by 4 blocks.
Fill in the corners.
Build one block out, and two blocks up from the base square to form a railing.
Extend each side of the railing by two blocks.
Fill in corners.
Apply water to each corner of the INNER base. Please note, if you made the base correctly, the water should not enter the 2 x 2 square in the middle.
Extend the outer layer by one block out, and two/three blocks up, this will form the walls. ( It may be 3 blocks tall if you want Endermen to spawn in the trap. )
Build a ceiling, after that, you are finished. Make sure to remove any torches, if torches were placed.
For some reason, i felt the trap works better during day time.
Thanks for watching, please remember to subscribe for more tutorial videos like this one.