Tip:
Highlight text to annotate it
X
The bottom part is okay
The outer container is not good why because it is totally of rust see the foundation also
the supporting point has also come out when the outer container is not okay according to the
bottom condition of the outer Container it made kill to any Direction
Maybe this direction or
this direction or that direction
It may be any direction
What happens if the straightness of the washing machine is not correct?
the tub also tilts to some particular direction
If tub tilts to a particular direction how we can wash the clothes and
if tub tilts to a particular direction there will be
unevenness and power consumption will be also more and the wear and tear will be more at a
particular point of the washing machine
remove the pertaining connections remove
remove this also
And there are connections at the capacitor remove them
So almost all it is separated and okay
Now the connection to the motor separated now almost all everything is over we disconnected
But we have to remember the connections
When the phase of assembling starts we have to remember the connections in order to give it back
And one more connection, this is earthing
Remove this
Cable is out now we disconnected everything from the bottom side and see the condition how it is which is fully damaged
See the cable I am pulling it out
Now the cable is out and still two more wires
And one more pipe is remaining pull it
Now everything we disconnected including the cable this part is separated
There is a small Rod
lift it and remove it
remove
so
It is out one is out
So this is the point
These are the four supporting foundation on top of it
I am lifting the outer container
container is separated
and tub is separated
So this is the top cover and this is the tub and this is the outer container
Now you can watch the condition of the outer container
How bad it is so it is full of rust if you want to carry out or if you want to?
build up any material in order to give the proper supporting to the sub while in operation, so we can get to the
tinkering work, and we so our money will be saved, so
so this is the tub and
This is the outer containers the tub is suspending on four points one two
One two three and four in order to separate the tub from the containers. We have to remove these four
suspensions