Tip:
Highlight text to annotate it
X
The Jonard UC-864 Modular Crimping Tool is a six-in-one tool used for Voice & Data installations.
It is designed to cut and strip both flat and round communication cables,
and Crimp 4 pin RJ22 connectors, 6 Pin RJ11 and RJ12 Connectors, and 8 Pin RJ45 connectors.
To cut cable, hold the tool with the cutting blade facing you.
Next insert the cable and squeeze.
Make sure to insert the cable perpendicular to the blade so your cut is straight and even.
To strip a flat cable, insert the cable into the two bladed side of the tool.
Squeeze the handles together and pull.
Make sure the cable is kept perpendicular so your strip is neat and even
To strip a round cable insert the cable into the round stripping hole located at the base of the tool head.
Gently squeeze the handles together and turn the crimper from side to side.
Remove the cable from the tool and give the end a slight tug.
The insulation comes off easily.
To crimp a connector, insert the cabled connector into the corresponding crimping slot
for a four, six or eight pin connector then squeeze
The tool’s ratcheting mechanism and mechanical stop
insures the cable connector will be properly secured on the cable.
Works every time.