Tip:
Highlight text to annotate it
X
Today, on this 2008 Ford F-350 were going to install part number sss-1. This is SuperSprings
SuperSway-Stops, an anti-sway system for air spring suspension. The intent of this part
is that it reduces body roll and decreases the sway by replacing the factory bump stops
with the SuperSway-Stops. This is very easy to install. Basically, all we have to do is
remove the factory bump stops. Of course, in this case we just sprayed them down with
some lubricant. Then, use a screw driver and pry them out.We
will go ahead and take a look at one of the stops. We want to lay it on our table, you
see we have the stop with the threaded rod installed already and then the flat washer
and the nut. Okay, were going to take our first stop and install it where the original
bump stop was. Well run the bolt through and put the flat washer on and then the nut and
go ahead and tighten it down. There is a built-in *** on the stop to help keep it in alignment
with the original factory mounting location.