Tip:
Highlight text to annotate it
X
Welcome to Ringdale ActiveLED The world's most efficient and longest lasting
lighting and control solution at an affordable cost.
What makes ActiveLED and LightSpace Management from Ringdale superior is the philosophy behind
the technology and it's implementation. We like simple controls where no PC, computer
or networking infrastructure is required -- where just a simple 6 wire telephone cable and telephone
type jack plugs make the connection from the lighting power supply to the Light Space Manager,
or you may call it a digital dimmer, a Plug-n-Play solution.
You can dim the lights by simply pressing the + more light button or the -- less light
button and get feedback from the 3 digit display which also doubles as a very energy efficient
night light. Notice the smooth reduction in light when dimming the lights from 100% to
50% and the absolute uniform dimming level of each light
fixture - and each LED module in the light fixture - this is possible due to Ringdale's
patented LED driver technology used in ActiveLED Power
Supplies. The leftmost button on the Light Space Manager is the mode control -- allowing
you to turn the lights ON, Off or being controlled automatically
by the built in motion sensor. When a person enters the motion controlled area the lights
will adjust to their High level -- when there are
no people present in the area User friendly and intuitive programming mode
is entered by holding down the center and right button simultaneously for 10 seconds.
Flashing LEDs indicate the programming mode. The mode button now becomes the Enter button
-- pressing it the first time after entering programming mode starts showing the default
operating mode like ON, OFF or Auto which the unit will enter after a power failure
or a power cycle. By pressing the mode or left button, the unit
will show the first parameter, Default ON level which you may adjust using the + or
-- key to the desired level and program by pressing the
left / Enter key. The enter key will program the current parameter and move on to the next
parameter, the low light level. Again - using the +/-
keys to adjust the low and OFF light level setting. When set to 0 the lights will go
off. After pressing the enter key on the left the timeout
1 parameter may be set. Again -- using the + or - keys to adjust the timeout in minutes.
When set to 0 the timeout is set to 10 seconds which is a demonstration mode. Pressing the
enter key on the left will register and move to the
next setting timeout 2. Again -- using the + or - keys to adjust the timeout in minutes.
When set to 0 the timeout is set to 10 seconds which is
a demonstration mode. Pressing the enter button on the left will complete the programming
of the device. All its parameters are remembered from
now on including times when the unit is not powered.
As Ringdale ActiveLED power supplies act as data repeater devices one LSM can direct an
infinite number of light fixtures in its segment, all having identical light output. LSM devices
with built in Infra-Red receiver will respond to IR remote control units of various manufactures
when set to an appropriate operating mode. The remote can now set the levels from 0,
20 to 100 percent in 10 percent increments by pressing the
0 key for 100%, the 1 key for OFF or low level, and 20, 30, 40, 50, 60, 70, 80 and 90 percent
by pressing keys 2 to 9. Ringdale Light Space Managers can be used
with ActiveLED fixtures as in wall mount devices or within fixtures or alongside fixtures
mounted on ceilings and on poles in indoor and outdoor applications.
Significant benefits can be reaped in Fuel Dispenser Canopies that are off the road.
Also help secure open parking structures as lights
come to their full on level if there is activity in the area. And, Facilities located in the
Arctic Circle, or very cold storage where only
sporadic lighting is required when product is moved in or out the facility.
For all applications where lights are difficult to reach and motion detection is required
Ringdale's EDSaP IR link is convenient and efficient, allowing you to program a motion
sensor up to 50 feet away with new timeout and light level parameters.
All of this with the simplest form of control, the Ringdale Light Space Manager, which comes
in many forms for any application that can benefit from a motion sensor indoor or outdoor.
Up to eight LSM devices can be daisy chained to one light fixture or Ringdale EDSaP capable
Power Supply for unsurpassed functionality and convenience in long hallways, gymnasiums
and other applications where larger area coverage is required.