Tip:
Highlight text to annotate it
X
thank you so much for visiting our website and for your interest in the
unique PLUG&GO pump
what is the new PLUG&GO pump?
basically it is a 4" submersible pump
which does not require a pressure vessel
nor pressure switch
nor complicated control boxes
the PLUG&GO pump looks like any other convencial pump
but with this pump there's no need for a pressure vessel nore pressure switch
control box
or any other complicated control units or
driver and sensors
it's all integrated in the head of the pump
just imagine these installation
all what is now requiring is to fit the pipeing on top of the pump
connect the electrical cable
plug it
in the outlet
and the pump
is installed
all the rest
the pump will take care off
it has a overload protection built into it has high and low voltage
protection built into it
dry running protection
it cleans the non return valve in case off impurities in the water
now howe could ZDS developpe a different
revolutionary technology
we took a pressure sensor
integrated
the sensor in the head of the pump itself
and when you open the valve
in your house
your tap literally in imagine your summer house
summer camp in the moutain you simply opened the valve
the pump detects a pressure drop
in the piping itself
and it starts to pump
just imagine the advantage
and the space that you save
as you installing an 80 or
150 Liter pressure vessel
The PLUG&GO pump is
somewhat more frost protected
where with commercials submersible pumps the pressure switch the
pressurecontrol
may
signale a motor to start
despite the fact that that piping may be frozen at the surface
sinds all the controle unit
is in the head of the PLUG&GO pump
you don't Risk
the fact that the pump will start and damage the impellers and the motor
we welcome you to the future with our new PLUG&GO technology
THANK YOU VERRY MUCH