Tip:
Highlight text to annotate it
X
Hello this is Rob Rubin and you're watching Expert Village. Assuming that the lens is
fine and the mask is in good shape then it is time to reassemble your goggles. Carefully
without putting your fingers on your outside frame you can put all the tabs back into the
goggle frame as such. They should just slide right in, you should not have to force anything
in. Some styles that have the mushroom caps on the end, you may have to push them into
the frame but once you do that they are going to lock into place. These have retention tabs
on them that have push pins so these are going to slide right back into the frame and then
it is just a matter of putting the push pins back in place. Once the lens is in place then
it is just a matter of snapping the mask back on, depending on the brand that you have it
will just slip back into the tabs as such. Make sure that the ear protection is attached
and if you are so inclined this is a good time to put the visor back on if you like
to wear a visor on your goggles and if not then you are pretty much done.