Tip:
Highlight text to annotate it
X
>> BLAINE: Ok. What we're going to do is we're going to blast this Corrado fender.
We got a little rust happening in the corner here. What we have here is a plastic media
booth, and with the plastic media we use it to shoot through the gun and we'll blast
it all down and it won't warp the fender, totally clean it out and you'll see it in
its natural state, bare metal. So what we'll do is we'll make some metal patches and
replicate the original fender and redo it all in metal so it's better than original.
>> STEPHEN: My name is Stephen Montanaro. I'm in charge of the body shop and paint.
I oversee what goes on over here. Basically, in the booth, 2 coats of single stage urethane.
It's going to be a matte finish so it's eighty percent matte additive to the gloss
paint.