Tip:
Highlight text to annotate it
X
Today on our 2007 Chevrolet Silverado new body we'll be test fitting the Kuat-NV
aluminum platform style two bike rack part number N101. To begin our test fit, we'll
slide the shank of the carrier into the receiver tube of the hitch, find the pinhole and install
our pin and lock. At the rear of the shank, we'll tighten the hand *** to engage
our anti-rattle device and secure our bike rack to our vehicle. Now, we'll go over
some clearance measurements. We have about 16 and a half inches of ground clearance.
The closest point of the carrier to the point of our vehicle is about 5 inches and we've
added about 16 inches to the overall length of our vehicle. We'll pull the orange
lever at
the base of the carrier to allow our carrier to unfold.