Tip:
Highlight text to annotate it
X
this is how it is done textile design painting Handmade on a shirt
of cotton and elestano
if you want to see , as I did , look
below. On the inside of the shirt I 'll hit
strips of tape. I will use the blade of a sketchbook to give support to the textile
once the shirt is smoothed
I'll stick tape strips
I will use the amount needed
to cover the area of the design , this is to give strength to the web at the moment of
applying paint with a brush
once in place the required amount of tape , I will turn to the right, the garment
a paper model design I locate the place where it will be painted
this same sheet I will design a template
to paint a background to the letters
but this I can do on the computer
I'll do it by hand to demonstrate
you can also make handcrafted
logo or design
make a prior stroke with pencil
subsequently , will
define ink
and then I'll cut with scissors or a cutter
or accurate
cut sheet bond paper can do it freehand or leaning
with a ruler
to cut the ellipsoid
I'm going to do with
scissors
once I have the template I will placed on the shirt in place
indicated
I'll fix with tape transparent
in this part I take care
that there are no wrinkles in the paper
I make sure the blade is securely attached to the fabric
and does not move at the time to be going
on the inside I will apply the minimum amount
tape
once done I am ready to apply the paint
carefully with the brush
so that the paint does not penetrate or run off
between the template and fabric
so do not charge too much paint brush when applying estarla
the strokes should be outside in the template
to the TV is well covered
I will apply
four or five coats of paint
allowed to dry about two hours
between coats if the weather is not too wet
since this painting is soluble in water in a dry environment
will dry soon
those who follow the next few seconds
is how I was applying the paint
to finish the background of this design
necessary layers are applied so that the color
background is uniform and equal
Template for letters of this design
use a sheet of sketchbook
and the cutter to remove
each of the characters
and drawing the planet that make up this design
it can also be used cardboard or paperboard
for this template
the important thing is to have firmly
when placing it on the web and be going
what is seen in the second coming is the
slicing process each of the characters of this model
I cut the sheet aa way that allows me the correct alignment
on the bottom and painted on t
lined up once you start to paint black
this time with a smaller brush to prevent
has drainage
between the cardboard and the paint already applied
on t
I can use some kind of adhesive that allows me
then easily remove the background template
for example, a glue stick
I will apply carefully
black color about three
four to five layers so that each of the characters is well defined
over white background
unsaturated too paint brush to avoid runoff
between the template and the background
I used some white paint to fix the template T
at this time what I'm doing is carefully follows
so that the cardboard will not break and serve me for future use
the background template is also removed
and left exposed to the design painted on the fabric
Also remove the tape that I put
at the beginning of the whole procedure
I then did some
details with brush and hand
like what are the lyrics delineate
and logo youtube
Subscribe