Tip:
Highlight text to annotate it
X
Today on our 2013 Kia Sorento, well be test fitting the Hollywood Racks Expedition 2 Bike
Carrier Trunk Mount, part number hrf6-2. To begin our test fit, well set the carrier onto
the cargo door of the vehicle and use the black levers located at the left and right
side of the carrier to adjust it. Now this carrier will fit onto the cargo door just
below the license plate. Well now go ahead and hook the top hooks to the top part of
the cargo door, the side hooks to the side part of the cargo door just above the taillights,
and the bottom hooks to the bottom of the cargo door. Well then tighten the straps to
secure it to the vehicle. If your vehicle is equipped with a rear windshield wiper,
you will need to make sure that there is enough clearance when your carrier is installed to
bring the cradle arms out. So with our carrier fixed to the vehicle,
well go ahead and again pull the lower levers on the carrier located on the left and right
side to swing the cradle arms out. The cradle arms need to be parallel to the ground or
slightly angled up. Well then undo the cradle straps, set the bike into the frame cradles,
and secure it with the straps. And that completes todays test fit for the Hollywood Racks Expedition
2 Bike Carrier Trunk Mount, part number hrf6-2, on our 2013 Kia Sorento.