Tip:
Highlight text to annotate it
X
Hello, this is Mario from AccessoryGeeks.com
And today I will show you how to install a screen protector on a phone.
For this purpose, I'm gonna use an iPhone first generation.
And this is some of the packaging, one of the packaging that we have.
And this is the high definition Mirror screen protectors.
Now before we even start on anything, I would recommend a pretty handy tool for you.
This is the micro fiber cleaning cloth.
This is really good at picking up dust.
Because you don't want any dust on your screen where you're gonna put your screen protector at.
Because it's gonna create air bubbles.
That's the one thing that you want to avoid.
So, I already pre cleaned this.
But.. this is available at AccessoryGeeks.com
Probably not the same color, but it's the same purpose.
For this purpose, I already opened the package for you
This is the screen protector itself.
As you can see them, somewhat mirror image, right now,because we have like a clear background right now.
Better we put it on here, it's a complete mirror.
As you can see here, there's step 1, says, “Please peel of this mask for application.”
And step 2, this is after you put it on.
In the package it also comes with the micro fiber cloth
but I wouldn't really recommend this one to clean it
unless you have an excellent type of solution, that you can put on the screen first.
Again, to make sure there's no dust on the phone, because it will create air bubbles
And you really wanna avoid that.
So I'm just gonna follow what the instruction says, step 1, please peel of this mask for application.
This is actually the part that's gonna touch the screen.
Within the packages, usually it comes with a small card board piece.
That you actually use to scoop the air bubbles out.
But, in this case I'm gonna use the package itself because it's made of card board.
As you can see here, they also have instructions on the back, with pictures.
So, if, you know, my instructions not enough for you, you can always go back to this card board..
the packaging and look at the back.
So, I already peeled off the first part.
So, very carefully, do not to touch the inside part of it.
I usually start from the bottom, because, I don't know why, I just start from the bottom usually..
Carefully align the screen protector.
This is what you need the card board for, to scoop the air bubbles out.
Don't worry about scratching the top part, because there is another sheet like this on top.
Make sure there is no air bubble going in here.
cause when it's on, it's a little bit hard to put it off.
And after it's completely on, it's aligned, just take off this part.
As you can see I didn't really do it really perfectly because I have air bubbles in it.
Then you can see the mirror effect.
And this is Mario from AccessoryGeeks, and that is how you install the screen protector.