Tip:
Highlight text to annotate it
X
Hi! My name is Adolph Ramirez from Tampa, Florida on behalf of Expert Village, this
is how to install a ceiling fan. Make sure you disconnect all of your power; shut it
off at the service panel. Don't rely on any kind of switches or anything like that. Just
make sure that you shut it off at the service panel. Then you need to remove this plate
here to expose if you have pre-existing wires. If you don't have pre-exisitng wires, then
you will have to get a certified electrician so they can run power and put a box with enough
support on top so that will support your fan. If you have a fixture, then you just have
to remove the fixture first, expose your wires and then go ahead and hook up your fan. These
are the wires. Here you have a set of different colored wires. You have your earth ground
which is your ground system. It is usually a bare wire or it may be also a green wire.
Red usually signifies that it is a switch wire so that it is controlled by some type
of switch on your wall. Your white is your neutral and your black of course, is your
hot and just make sure that it is always got a cap on it to ensure that you don't get shocked
or anything like that. But again if you shut it off at the service panel, you shouldn't
have any problems.