Tip:
Highlight text to annotate it
X
Today on our 2008 Ford Edge well be test fitting the Thule Hitching Post Pro folding tilting
four bike rack with anti-sway cages, part number TH934XTR. With our two inch adapter
already removed from the bike rack shank, well slide the shank into the hitch, line
up the hitch pin hole and install and tighten down our anti-rattle bolt. Now that the bolt
is tight, our bike rack is secured to the vehicle. At this point well give you a few
measurements. Here at the back of the bike rack our ground clearance is 11 inches. From
the closest point of the bike rack here at the mast to the back of the vehicle measures
five and a half inches. Well now pull the pin here at the bottom of
the mast and allow the mat to tilt down. We can then open our cargo door. As you can see
we can still gain access to the cargo area, even with the bike rack secured to the vehicle.
Well next pull the pin here at the top of the mast and bring out the dual arms. We can
then undo the straps and expose
our cradles.