Tip:
Highlight text to annotate it
X
Build your willys, rear leaf spring installation. To begin, Insert a leaf spring pivot eye bushing
into the front of the leaf spring and align inside the leaf spring to frame pivot eye
bracket, tapping into place. Secure the leaf spring to the bracket using a leaf spring
pivot eye bolt. Using a nut and the appropriate tool, pull the bolt in further to create a
groove that will keep the bolt secure. Remove the nut and slide on a lock-washer. Twist
the nut back onto the bolt and tighten. Insert a cotter pin into the end of the bolt, wrapping
the ends around the tip. Finally, insert the grease fitting in the open end of the bolt
on the outside part of the frame and tighten to finish.