Tip:
Highlight text to annotate it
X
Hello everyone, i'm emanuele Bonaglia and welcome to my diary, in today's video we will make a
new lesson of "let's leanr together cluny". for this , I put on the first two pins
two pairs, one for each needle, after which I put on the third pin 3 couples and last
pin I put 2 pairs. We work from third pair, twisted to make two
the carrier, one on the vertical. then I decided to add another couple, we make two
twisted of carrying two of the vertical, point canvas and then spiked foot. the couple
outermost abandonment, the other becomes the new carrier, then the attorcigliamo
twice, once the vertical attorcigliamo 1 time the vertical and two times the carrier
and we continue; this is called the twisted, or point Anne, of which there are many
versions. the vertical pairs are twisted once, while the carrier is twisted
twice, let your foot, put it needle and continue with the process until
Reach the intersection with the cordetta. We begin the part of cordette, we
rhyme cordetta, coming down with two couples, the stop with a pin and do the other
cordetta, then we make the intersection we have already seen in other episodes let's
learn together, then we crossed two pairs central, needle, the two pairs of left
and right are twisted, and then you It is the ultimate crossover. There linker in a puff
video of this intersection. after which continue with processing cordette, we
before this, in a semicircle, half do the pippiolino, in this way, and then continue
with the machining. we also work the other cordetta and then we make the crossing, such as
previous, then we continue to work the cordetta stopping to make pippiolino
when necessary. of course, working on a cordetta, it is impossible to give a rounded effect
of the drawing. and then we continue the cordetta arrived at the crossing, we stop to perform
the other. the intersection runs like that we have already studied. here we are
intersection most important, then the carrier He works the two pairs of cordetta, then
two pairs of cordetta, a working point canvas between them, in this way, the pair
outer becomes the new carrier, the more left to speak. then it is
twisted twice, once vertical and is the carrier to perform the bisetta
straight. the other two pairs, form a cordetta which continues in the drawing. We must always remember
to tighten the points, now we stop and we work the other cordetta. here is the intersection
as it is. this type of intersection, is particularly processing Lace cluny fact
it is always found in all the magazines and books about this lace, and is
also the peculiarity that I wanted to show in this video. we continue with the cordette.
we made the switch to the cordetta arrive at the crossroads, the last work
Tour bisetta and make the crossing. with the supporting work of the two pairs
cordetta, then let the carrier, the two couples, work a cloth stitch, in
This way, the torque more to the left becomes the carrier, is then twisted two
times, once the vertical and is done the point, which in this case is kinked.
it continues in the processing, we put the needle and do another round of this
bisetta. Now we work with the cordetta two couples remained, up to the little hole
crossing and then we start working normally. If you are not already a member of
my diary, but you would like to be, subscribe and join me in this adventure, I'm sure
we'll have a ton of fun and we'll learn so many new things. Also do not forget
to share the video and follow me on the social links below.