Tip:
Highlight text to annotate it
X
New items. Part 2/3. Spring contact
The next innovation
this is a new collector-tank
more precisely - a new system of spring contact
as for conventional collector-tank
and for the universal
let's see what we have is a standard collector-tank
As we remember
spring contact of the collector-tank
we have is as follows
this spring, which sticks out from the center of the collector-tank
and serves as a central contact
what is disadvantage of this design?
that the spring may become distorted
and short-circuit on the bottom of the tank shell
will be short-circuited, and that we should not
the new version of the collector-tank
This spring has been removed by a special body
Here's what a new spring contact
is a prototype, it is not covered by chrome
Here, this column
He pressed
inside the cylinder - Spring
as a button with a pen
spring is very tight
pressed with great effort
it provides a good contact with the central contact bottom of the tank
what we need
better contact - the lower the contact resistance
this contact will be bent is nowhere
this ensures that no short circuit to ground
cheat collector-tank
cheat tank battery pack
with a new collector-tank thrust becomes more tightly
because the plane of the pusher
more duct covers
and the air flows only along the sides
turned out fine
I first would like to extend a slot delay was not as tight
but now I like to so-
better flow of fluid and more steam
a palpable thrust
So it was the second innovation
a new type of spring contact to the collector-tank