Tip:
Highlight text to annotate it
X
How to Take Apart Your XBox 360. Taking apart your Xbox can be accomplished with a few tools
and instructions. You will need Xbox Flat head screwdriver T10 torx screwdriver and
gloves (optional). Step 1. Disconnect all cords and aftermarket hardware that are connected
to your Xbox 360 console. Call Microsoft at 1-800-4-MYXBOX before taking apart your Xbox
360 in case it may possibly still be under warranty, or for some other guidance prior
to voiding your warranty altogether. Step 2. Hold power button in for 3 seconds to discharge
any power still stored in the systems components. Step 3. Remove the hard drive by pressing
in the button on the top and pulling upwards. Step 4. Remove the faceplate by gripping it
firmly at the top and bottom of one end and pulling gently until it pops off. Do the same
at the other end. Step 5. Remove the gray vents on the top and bottom inserting a small
flat head screwdriver between the vent and Xbox 360 and prying upwards. Step 6. Insert
a small flat head screwdriver into the small slots on the back of the console between the
seam of the cases and push until you hear a pop. Do the same for both top and bottom.
Step 7. Pry the clips apart on the front of the Xbox with a small flat head screwdriver
or your fingernail to finish separating the cases. Step 8. Place your console on the floor
with the back facing you and the exposed metal facing up. Step 9. Unscrew all screws that
hold the exposed metal pan on with a T10 torx screwdriver. Keep the screws together in a
safe spot so you will have all of them when it comes time to put your Xbox back together.
Step 10. Flip the console over. Step 11. Pull up on the top case to expose inner components
of your Xbox 360 console and your finished. Did you know In 2007, Xbox Live added a new
subscriber every 8 seconds.