Tip:
Highlight text to annotate it
X
I envied Superman always because he can fly.
His logo looks totally stylish. How do you do the logo made of polymer clay, I will
show you now.
For the cane I use polymer clay in shades of yellow and red. The link to the
template is in the info box. As tools I used a Clay Machine, an Dottingtool and
a very sharp knife.
I roll out both colors. At level 1.
I put the template on the red. I cut out the template with a very sharp knife. This
logo you need 6x.
I put successive the six logos.
I fill the gaps with yellow polymer clay.
I take the template as a guide. I tilt the Superman logo with a yellow ribbon.
I wrap the logo with a red ribbon.
I reduce the cane.
The cane should look like this.
With an Dottingtool I recess in the yellow. This creates a 3D effect.
For the Superman knife I use Fimo Effect icy blue and metallic blue. I used the Clay
Machine, a knife, acrylic roller, various Dottingtools and Superman cane.
I roll out the metallic blue on Level 1.
I wrap the knife.
I elapse the edges.
I lay the cane on the knife.
I decorate the knife.
After baking the knife looks like this. By Metallic blue it's nice glisten on. Finally, I
varnished the knife.