Tip:
Highlight text to annotate it
X
Welcome to the Reusable Packaged Wood Container Assembly Instructions
You may require a rubber mallet or hammer during assembly.
We recommend wearing safety glasses, and gloves when needed.
Before assembly, be sure that cargo is centered on the rubber mat.
1. To begin place end panels with flat angle brackets into the slotted location on the skid
Sliding metal bracket edge securely under the plywood deck.
2.Place long side panel into vertical position
Making sure that the 90 Degree retaining hardware aligns with the adjacent end panel.
3. Place spring clip into 4 hardware locations
and secure by hitting with a rubber mallet
or a hammer
or the palm of your hand.
4.Repeat this process on opposite side panel making sure all 4 corners are fastened securely.
5. Place the lid on top of the container making sure that all of the retaining hardware lines up.
6. Then attach the hook of the short leg of the spring clip into the square hole of plate, and strike to secure.
Do this to all 4 lid spring clips.
Always check that all the hardware has been secured properly before shipment.