Tip:
Highlight text to annotate it
X
Today on our 2011 Toyota Corolla well be test fitting the Rocky Mounts TieRod roof mounted
bike rack part #: rky1014. Now, our vehicle is already equipped with a roof rack system
so were ready to go ahead and mount it to the vehicle. To begin, well set the head of
the bike rack directly over the front crossbar, we can then bring the rubber coated steel
straps around and resecure them to the head of the bike rack. With the head loosely fit
well move to the rear mount bringing the clap underneath the rear crossbar and securing
it with the two wing nuts. We can then move back to the front crossbar where well secure
the head of our bike rack with the alan wrench included in the RockyMounts TieRod package.
And with the head secured we can go ahead and install our head cover and that will secure
our bike rack to our vehicle. Well now make sure that the skewer of our
bike rack is opened up and that our rear wheel strap is undone and out of the way. we can
then place the bike into the bike carrier and clamp down the front fork. Well then move
back to the rear mount where well run the straps through the wheel and clamp it to the
bike rack. And with that our bike is secured and were ready to hit the road. And that completes
our test fit of the RockyMounts TieRod roof mounted bike carrier part #: rky1014 on our
2011 Toyota Corolla..