Tip:
Highlight text to annotate it
X
Today on our 2013 Chevy Cruze well be test fitting the Thule Raceway two bike carrier,
part number TH9001. Before we begin our test fit we will first need to refer to the Thule
fit guide, or the included instructions to determine what number our fit dial should
be at. After setting our fit dial well place the carrier onto the vehicle. Well put the
top hook to the top part of the trunk, and the bottom hooks to the bottom part of the
trunk. Well then turn the grey knobs on the left and right hand side of the carrier to
tighten down the straps to secure the carrier to the vehicle. Now that the carrier is secured
to the vehicle were ready to load our bike. Well flip out the grey lever at the front
of the carrier to swing the cradle arms out. Note that the cradle arms do need to be level
or slightly angled up. Well lock the cradle arms in position, and undo our cradle straps.
Well set the bike onto the frame cradles and secure it with the straps. That completes
todays test fit for the Thule Raceway two bike carrier, part number TH9001 on our 2013
Chevy Cruze..