Tip:
Highlight text to annotate it
X
First we turn on, the M-audio Xponent.
Loading in progress....
load complete!
Selecting the software, in this case "Torq 1.5.2"
Double click
Loading The Software....
The software is ready!
In order to register all the interaction between hardware/software we need to save the session
Then we gonna search for our music folder
select the tracks that we are going to work with
Drag and drop the track in Deck A, I have Load in (Deck A) Adrihan Dezihell - Abadia (Electrik Bay Mix)
then do the same in deck B, in this case i have Load Adrihan Dezihell - Autum Dusts (Original Mix)
We are Ready
we gonna do a Simple Scratch in deck A, after that we gonna set a Cue point
another Simple Scratch but this time in deck B, we also set a Cue point
We move the fader to the left in order to work with deck A
Checking Cue button, then hitting the Play button in order to run the song, so i can explain some functions
moving GAIN *** (increasing and decreasing)
pushing/unpushing the Kill button(GAIN)
moving HIGH *** (increasing and decreasing)
pushing/unpushing the Kill button(HIGH)
moving the MID *** (increasing and decreasing)
pushing/unpushing the Kill button(MID)
moving the LOW *** (increasing and decreasing)
pushing/unpushing the Kill button(LOW)
push Cue button on deck A for stop or being in the initial starting point!
Now The Same Dynamic but with Deck B
sliding th fader to right side for deck B
moving GAIN *** (increasing and decreasing)
pushing/unpushing the Kill button(GAIN)
moving HIGH *** (increasing and decreasing)
pushing/unpushing the Kill button(HIGH)
moving the MID *** (increasing and decreasing)
pushing/unpushing the Kill button(MID)
moving the LOW *** (increasing and decreasing)
pushing/unpushing the Kill button(LOW)
Ok, We are good at this point!
This *** is for the Cue Mixer (Headphones)
the *** aside is for the volume of the HEADPHONES
below those knobs there are two buttons (SYNCS) for each deck (A&B)...
im gonna use the deck A for demostrate how to use the predeterminate FXs
loading Delay FX
push enable button (ON or OFF)
increasing the FX *** (SEND AMOUNT)
incresing the FEEDBACK ***
decreasing the FEEDBACK ***
decreasing the FX *** (SEND AMOUNT)
push enable button for turning off the Fx
loading REVERB FX....This will auto on the Enable Button
and the same thing, (INCREASING-DECREASING) Feedback *** and Send Amount ***, enable button
loading FLANGER FX....This will auto on the Enable Button
and the same thing, (INCREASING-DECREASING) Feedback *** and Send Amount ***, enable button
PHASER FX....
and the same thing, (INCREASING-DECREASING) Feedback *** and Send Amount ***, enable button
DUAL FILTER FX
this one work a little different then the last one, we need to increase all the way up the SEND AMOUNT ***,
will work like this
from half to the right is HIGH CUT FILTER
and from the half to the left is LOW CUT FILTER
now DISTORTION FX....
and the same thing, (INCREASING-DECREASING) Feedback *** and Send Amount ***
STROBE FX....
we need to increase all the way the SEND AMOUNT ***
and the FEEDBACK knobs chops with a mute the sound 1/16,1/8,1/4 etc
you can listen how its works....COOL ISN'T :D
REVERSE FX....
you need to increase all the way the SEND AMOUNT ***
push the button next to the enable button if you want to do a backward sound
BRAKE FX....
you need to increase all the way the SEND AMOUNT ***
and the the AMOUNT *** will be the seconds or elapsed time that the brake will last
then we push the button below the AMOUNT ***
REPEAT FX
This one is a LOOP TOOL as we INCREASE THE FEEDBACK ***, we chop the loop into 1/16,1/8,1/4, etc
listen and watch!
Great!!!!
Now im gonna use the LOOPS CONTROLS buttons and I will play around with the PITCH!
To do the same as the REPEAT FX, but better
WATCH!
I have the PITCH in a range of 8 %
to do an FX that you might heard before!
i will increase the PITCH in 100%
Check this Out!
And Kill It with an BRAKE FX
After using any FX you should set to 0 Knobs and Disable buttons OR.....
MESS UP THE SESSION! xD
LOL
The Same FXs that we use in Deck A can be use at the same time in Deck B
if we touch the plates, we can use it like a turntable (VINYL MODE)
We can Rewind manually
but if we touch the Edge of the PLATE, we can decrease the speed or increase it (pitch bend)
by touching the SEEK BUTTONS we can backwards/rewind or forward the track!
next thing is the TRACK PAD
This is a dual purpose track pad that can act as either a mouse (such as a track pad on a laptop) or as an X/Y MIDI controller
FOR USE WITH AN FX, you need to enable the MIDI button
then add an FX and adjusts as desire the SEND AMOUNT ***, and the FEEDBACK ***
Adding an FX
adjusting the SEND AMOUNT-FEEDBACK AMOUNT knobs
using as an X/Y MIDI controller
You can also work with the Knobs at the same time
COOL ISN'T
NOW LET´S DO A QUICK MIX, WITH MY TWO SONG :D
you are listening to.... Adrihan Dezihell - Abadia (Electrik Bay Mix)
you are listening to.... Adrihan Dezihell - Abadia (Electrik Bay Mix)
you are listening to.... Adrihan Dezihell - Abadia (Electrik Bay Mix)
you are listening to.... Adrihan Dezihell - Abadia (Electrik Bay Mix)
YOUR IN THE MIX WITH ADRIHAN DEZIHELL aka Dj Fuse
you are listening to.... Adrihan Dezihell - Autum Dusts (Original Mix)
you are listening to.... Adrihan Dezihell - Autum Dusts (Original Mix)
Thanks 4 watching, Adios