Tip:
Highlight text to annotate it
X
Today on our 1996 Chevy Blazer, we're going to install a curt hitch part number C13020.
Each process we do here on the driver side is going to be repeated identically on the
passenger side. A total of six attachment points, three on each sides. Our fasteners
will be our 1/2" carriage bolt and block along with a 1/2 plunge knot because this vehicle
doesnt have a spare tire, we're ready to go ahead and put our hitch directly into position.
We'll use our bolt and block to go from inside to frame rail out to hold into position once
we get into place.Now, it's a good time to get an extra set of hands that will hold the
hitch into place while installing your fasteners. We'll install each fasteners finger tight
until we get them all in place. Now, with all the fasteners in place we can
go ahead and tighten them down. Now, with all the fasteners tighten down we can go ahead
and torque its specifications. Now, with all the fasteners torque its specification that
will complete the install of our curt hitch part number C13020 on our 1996 Chevy Blazer.