Tip:
Highlight text to annotate it
X
Hi, I'm Jennifer from Workroom Social and today we are going to talk about why does
my top thread keep breaking? I don't know if you've ever experienced this, I know I
have. You'll be sewing and all of a sudden your top thread will just break right in the
middle of a seam. Super annoying! So I'm going to talk to you today about some ways to troubleshoot
those problems.
The first thing you should do is just to re-thread your machine. Just take everything out. Go
ahead and pull on your thread, make sure everything's moving smoothly up there. You can cut the
tail off and just start from scratch. That's going to be the easiest way to troubleshoot
this because sometimes things just get a little bit funny. Okay, so I'm re-threaded and now,
hopefully, I will be sewing easily without any problems.
But if you're still having problems, there are a couple of things to check on. First
is your tension. Sometimes if your tension is too high, if this were up, I don't know,
maybe I accidentally had it all the way at nine, your thread can get stuck and it can
tear. So that's one reason why your thread might be ripping.
Other things to look for are obstacles. Is your thread getting caught on something? Perhaps
up here maybe my thread accidentally got twisted around here, this tension disk, which is used
for winding our bobbins, and so that's putting a lot of stress on the thread and as it's
going through the machine, it just rips. So check for any obstacles that might be affecting
your stitches.
The last thing that you should check is the spool itself. Sometimes on home machines,
the spool of thread itself can be too heavy, too big, and it kind of gets stuck spinning
around the spindle here, and so that can put a lot of tension on the thread and cause it
to rip. If the spool is just a normal spool, it's not a giant spool, you might want to
take the spool off and double check this bottom area here and make sure that there's nothing
that's holding the spool taut while it's turning. Maybe over time you're getting a lot of adhesive
buildup from the bottom of your spools on your sewing machine and that's causing it
to not move smoothly.
So that's just a couple of things that you can do to troubleshoot, to try and figure
out why your top thread keeps breaking.