Tip:
Highlight text to annotate it
X
Today on our 2012 Kia Sedona, well be test fitting the Thule Crossroad Roof Rack using
the 50 inch square bars, part number THLB50 and the Thule Crossroad Roof Mounted Rail
Foot Pack, part number TH450. With our vehicle already equipped with the factory side rails
and our roof rack already pre-assembled, were ready to go ahead and mount it to the vehicle.
We begin by placing the front crossbar on top of the vehicle. Well need to center the
crossbar from left to right. Well also need to make sure that the triangles on each to
the feet are centered over the side rails. We also need to locate a fixed point on each
of the side rails to do a measurement. Well measure from the fixed point to the leading
edge of the foot of the crossbar. With our crossbar, were wed like it. Well tighten it
down using the included Allen key within each foot. We do need to work back and forth, from
left to right, now move to the rear crossbar. Well repeat the same mounting process , only
this time well measure from the center of the front load bar to the center of the rear
load bar.