Tip:
Highlight text to annotate it
X
Today we're going to review part number AM3S360. This is a Kenda Loadstar Tire size ST205/75D14
bias trailer tire. It's mounted on a 14-inch Dexstar Galvanized Steel Wheel. This wheel
has a galvanized finish for superior corrosion resistance it's on the front of the wheel
and on the back of the wheel. Now we'll do a few measurements on the wheel, the diameter
which is measured inside to inside, it will be 14 inches. The width on this wheel will
be 6 inches wide. This wheel does use a bolt pattern of 5-hole
4-1/2 inch bolt pattern. And on a wheel that has an odd number of bolt holes like in this
case five lugs, there'll be a couple of ways you can measure the bolt pattern and I'll
show you both of those. The first way is if you draw a circle through the center of all
five of the lug holes, measure the diameter of that circle that will tell you the bolt
pattern. So in this case if we measure from the center of this hole to the outer edge
of that circle it will be 4-1/2 inches, so that will be a 5-lug 4-1/2 inch bolt pattern.
The second way is if you pick one of the lug holes and measure it from the center of that
hole to the center of the lug hole adjacent to it, either way.