Tip:
Highlight text to annotate it
X
Thanks for purchasing your FitPAWS Donut. This video will show you how to inflate it.
Please read the FitPAWS Safety Care and Use Instructions before using your FitPAWS Donut.
Also, make sure to watch the How-to-DVD that is included
with your equipment.
The Donut includes a FitBALL pump.
Please screw the cone shaped adapter on to the end of the FitBALL pump.
Now we can start inflating.
First, take the white plug
out of the Donut.
This is what's used to hold air inside the Donut.
At full inflation, the Donut should measure 13" high.
You do not have to use the Donut fully inflated.
Make a mark on a wall so you can measure the Donuts height during inflation.
Once you Donut is inflated at the desired height, please push the plug in
firmly so it will hold the air in.
You can also use the FitPAWS Donut Holder for your Donut.
It provides extra stabilization,
and it's a great practice indoor tire jump for small dogs.
Remove the plug from the holder.
The Donut holder just takes a little bit of air
to hold the Donut in place. Make sure not to over inflate the Donut Holder.
Once it's inflated,
take the plug and push it firmly in the hole.
This will hold the air in.
Place the holder underneath the Donut to provide extra stabilization.
It's more challenging without the holder.
Now it's time to start training.
Thanks so much for watching!