Tip:
Highlight text to annotate it
X
Hi, it’s Steve from PartSelect. Today we’re going to show you how to change the light
bulb on your dryer. Really easy job, all you’re going to need is a Phillips screwdriver. Let
me show you how we do it.
Now to change the light bulb on this model of dryer we need to open the door, and located
on the rear bulkhead there is a plastic cover that encases the light bulb. It’s held in
place by a single Philips screw. Just remove the screw, tilt the cover up, and lift it
out.
If the cover is missing on yours or is damaged it should be replaced.
We’ll simply unscrew the bulb.
Make sure you have it threaded in tightly.
Next we’ll replace that cover; hook the tab on the top first, then replace the screw,
and our repair is complete.
Told you that was an easy job. Thanks for watching, and good luck with your repair.