Tip:
Highlight text to annotate it
X
Hi folks. Today, we're going to demonstrate the installation of the Access Truck Bed Mat.
This is how it comes shipped. We're going to unpackage it now. The tools necessary to
do this installation are a drill with a 3/32 drill bit, a number 2 Phillips bit, tape measure,
protective eyewear. We've got a nice clean truck box. I've familiarized myself with the
instructions.
Now we're ready to put the mat in the back of the truck. I've got my mat centered side
to side. I've got a quarter inch to the front of the box, one-half inch to the rear. We're
ready to install our snaps. We're using the bed mat as a template. The snaps have a through
hole that acts as a guide for the drill bit. I've already inspected the box for any obstacles.
Now I'm ready to drill. Assemble your screw and snap, roll your carpet back, and carefully
turn your screw in. And snap. I've got this snap fastened. I move to the opposite rear
and work my way forward on the remaining snaps. Here you go, folks. That's the install.
The Access Truck Mat can easily be removed if needed, but while in place, it will protect
your cargo, your truck bed, and your knees. Thanks for watching the video, and check out
our other products online.