Tip:
Highlight text to annotate it
X
Sublimating an image onto a jigsaw
Create your design using the supplier template and print
Remove the jigsaw from its packaging
Cut away any excess paper around your design
Place a Teflon sheet onto the heat press bed
This helps remove the jigsaw when it is complete
Carefully slide the jigsaw from its cardboard base onto the Teflon sheet
Push the sides of the jigsaw in to tighten up the pieces
Place your design face down onto the jigsaw making sure that the transfer overhangs the edges all the way around
Place the Teflon sheet over the jigsaw taking great care not to disturb the transfer
Using medium pressure press for 60 seconds at 200 degrees C
After the allotted time open the press and remove the transfer
Carefully slide the jigsaw back onto the cardboard backing
Your jigsaw can now be placed into a presentation package
For more How To Sublimate video tutorials visit www.sawgrasseurope.com