Tip:
Highlight text to annotate it
X
To remove the paper or canvas roll, first press the paper unload button. The paper will automatically rewind.
Pull the blue lever into the unlock position and carefully slide the locking unit to the left as far as it will go.
Lift the paper roll off the printer and into the grooves as shown.
To reload or replace a roll, remove both end sections from its spindle by lifting and pulling the light blue handles.
If the new roll is of a different width then set the core adapters to the required core width using the slider as shown.
Push the end sections onto the new roll and fold the blue handles down so they are flush.
Place the roll onto the printer so that the paper will feed from the top of the roll into the feed slot.
Slide the locking unit to the side of the roll and raise the blue locking lever to the locked position.
Feed the paper through the feed slot, so that it is visible below the printing area. If the paper will not feed through, change the amount of suction using the up and down arrows on the operation panel.
If the printer settings, including colour profile are being handled by another software program, then after the media roll is loaded, choose no, then scroll down the list and choose no paper selected.