Tip:
Highlight text to annotate it
X
Okay, now that we have this ironed down, we are ready to sew it in place. We are going
to try to stay close to this edge so we don't end up with a lot of free material there.
And also to make sure that we leave plenty of room for the ribbon to go through. Which
should be right in here.
This one helps if you pull it straight all the way down so it doesn't try to tuck it
in anywhere. Make sure you take you pins out where you need to. Finish stitching it at
the end. We will check to make sure you left enough room to get in. Make sure you didn't
overlap a whole lot here because you will see that at the end. And from the other side,
this is what it will look like.