Tip:
Highlight text to annotate it
X
JONATHAN MCDONALD: Very commonly missing part on '86
to '93 Mustangs is the coil cover.
Now this coil cover completely hides
all the coil and the wiring that goes to the starter solenoid.
Now our 5.0 Resto brand coil cover
is identical to the original, has the correct mounting tabs,
even has a notch cut out for the coil wire to pass through.
Installation is extremely simple and will take you less than a
minute.
And it will greatly improve the appearance of your underhood.
Slide the coil cover down into place
engaging the tabs on the bottom with the frame rail
right above the display bar mount.
Then line up your tabs and the middle one right
behind the brake master cylinder on the strut tower.
The top one with the hole right next to the fender--
use our 50resto push pin kit to attach the coil
cover to the car and you're done.
All right, that literally took seconds to install
and completely hides all the nasty wiring behind here.
Now for more Mustang restoration and renewal parts,
check out latemodelrestoration.com.